Clik here to view.
New CCNA – Operation 2
Question 1 Refer to the exhibit. A network technician is asked to design a small network with redundancy. The exhibit represents this design, with all hosts configured in the same VLAN. What...
View ArticleClik here to view.
New CCNA – Operation Questions
Question 1 Which command would you use on a Cisco router to verify the Layer 3 path to a host? A. traced address B. traceroute address C. telnet address D. ssh address Answer: B Explanation To check...
View ArticleClik here to view.
New CCNA – Security Questions
Question 1 Which Cisco Catalyst feature automatically disables the port in an operational PortFast upon receipt of a BPDU? A. BackboneFast B. UplinkFast C. Root Guard D. BPDU Guard E. BPDU Filter...
View ArticleClik here to view.
New CCNA – EIGRP Questions
Question 1 A network administrator is troubleshooting an EIGRP problem on a router and needs to confirm the IP addresses of the devices with which the router has established adjacency. The retransmit...
View ArticleClik here to view.
New CCNA – OSPF Questions 2
Question 1 Why R1 can’t establish an OSPF neighbor relationship with R3 according to the following graphic? (Choose two) A – Configure EIGRP on these routers with a lower administrative distance B –...
View ArticleClik here to view.
New CCNA – OSPF Questions
Question 1 Which characteristics are representative of a link-state routing protocol? (Choose three) A. provides common view of entire topology B. exchanges routing tables with neighbors C. calculates...
View ArticleClik here to view.
New CCNA – DHCP Questions
Question 1 When a DHCP server is configured, which two IP addresses should never be assignable to hosts? (Choose two) A. network or subnetwork IP address B. broadcast address on the network C. IP...
View ArticleClik here to view.
New CCNA – IP Routing 2
Question 1 Users on the 172.17.22.0 network cannot reach the server located on the 172.31.5.0 network. The network administrator connected to router Coffee via the console port, issued the show ip...
View ArticleClik here to view.
New CCNA – IP Routing Questions
Question 1 A router receives information about network 192.168.10.0/24 from multiple sources. What will the router consider the most reliable information about the path to that network? A. an OSPF...
View ArticleClik here to view.
New CCNA – Frame Relay 2
Question 1 What are two characteristics of Frame Relay point-to-point subinterfaces? (Choose two) A. They create split-horizon issues. B. They require a unique subnet within a routing domain. C. They...
View ArticleClik here to view.
New CCNA – Frame Relay
Question 1 The output of the show frame-relay pvc command shows ”PVC STATUS=INACTIVE”. What does this mean? A. The PVC is configured correctly and is operating normally,but no data packets have been...
View ArticleClik here to view.
New CCNA – Subnetting 2
Question 1 Refer to the exhibit. A new subnet with 60 hosts has been added to the network. Which subnet address should this network use to provide enough usable addresses while wasting the fewest...
View ArticleClik here to view.
New CCNA – Subnetting
Question 1 Refer to the exhibit. Which subnet mask will place all hosts on Network B in the same subnet with the least amount of wasted addresses? A. 255.255.255.0 B. 255.255.254.0 C. 255.255.252.0 D....
View ArticleClik here to view.
New CCNA – InterVLAN Questions
Question 1 Refer to the exhibit: Which two statements are true about interVLAN routing in the topology that is shown in the exhibit? (Choose two) A. Host E and host F use the same IP gateway address....
View ArticleClik here to view.
New CCNA – VLAN Questions
Question 1 What are three benefits of implementing VLANs? (Choose three) A. A more efficient use of bandwidth can be achieved allowing many physical groups to use the same network infrastructure B....
View ArticleClik here to view.
New CCNA – NAT PAT Questions
Question 1 Which two statements about static NAT translations are true? (choose two) A. They are always present in the NAT table. B. They allow connection to be initiated from the outside. C. They can...
View ArticleNew CCNA – Access list Questions
Question 1 Which item represents the standard IP ACL? A. access-list 50 deny 192.168.1.1 0.0.0.255 B. access-list 110 permit ip any any C. access-list 2500 deny tcp any host 192.168.1.1 eq 22 D....
View ArticleClik here to view.
New CCNA – RSTP
Question 1 Which three statements about RSTP are true? (Choose three) A. RSTP significantly reduces topology reconvening time after a link failure. B. RSTP expands the STP port roles by adding the...
View ArticleClik here to view.
New CCNA – STP 2
Question 1 Three switches are connected to one another via trunk ports. Assuming the default switch configuration, which switch is elected as the root bridge for the spanning-tree instance of VLAN 1?...
View ArticleClik here to view.
New CCNA – STP
Question 1 Refer to the topology shown in the exhibit. Which ports will be STP designated ports if all the links are operating at the same bandwidth? (Choose three) A. Switch A – Fa0/0 B. Switch A –...
View Article